EMERGENCY?07931 343689
All articles

Solar Diverter Versus Immersion Heaters

10 November 2026

A sunny afternoon can produce more Solar PV electricity than a home can use at that moment. Rather than exporting that spare power to the grid, many homeowners ask about solar diverter versus immersion heaters and whether one is better than the other. The key point is that they are not always competing products. In most suitable homes, a solar diverter controls an existing immersion heater, turning surplus solar generation into stored hot water.

That distinction matters when planning a practical energy upgrade. The best arrangement depends on your hot-water cylinder, current heating system, electricity tariff, daily routine and the amount of Solar PV your roof can generate.

Solar diverter versus immersion heaters: the key difference

An immersion heater is an electric heating element fitted inside a hot-water cylinder. When electricity passes through it, the element heats the stored water directly. It is a straightforward and well-established way to provide hot water, either as a main source of heating or as a useful back-up to a boiler, heat pump or other system.

A solar diverter is the intelligent control that decides when to power that immersion heater. It monitors electricity flowing to and from the property. When your Solar PV system is producing more electricity than the house is using, the diverter sends the surplus to the immersion heater instead of allowing it to be exported.

Put simply, the immersion heater does the heating. The diverter helps it use solar electricity that might otherwise leave the property. This means the usual decision is not necessarily solar diverter or immersion heater. It is often whether your existing cylinder and immersion heater are suitable for a solar diverter.

How a solar diverter works in everyday use

Solar generation changes constantly with cloud cover, the season and the time of day. A quality diverter responds to those changes by adjusting the power supplied to the immersion element. It does not need a bright, cloudless day before it starts making a useful contribution.

For example, if your panels are generating 2.5 kW and your home is using 1 kW, there may be around 1.5 kW available. The diverter can direct that spare electricity to the cylinder. If a kettle is switched on or the washing machine starts a cycle, the available surplus falls and the diverter adjusts accordingly.

The result is hot water stored for later use. That is particularly valuable for households where showers, baths and washing-up take place in the evening, after solar output has reduced. Your cylinder effectively becomes a simple thermal battery.

A diverter is not usually designed to draw electricity from the grid simply to heat water. It prioritises genuine surplus solar power. Most systems can also be set up with a timed boost where required, so there is still a dependable hot-water supply during darker periods.

When an immersion heater is useful without a diverter

An immersion heater can still have an important role even if Solar PV is not part of the plan. It provides independent electric hot-water heating and is often retained as a back-up where a boiler serves the cylinder.

It can also be useful during boiler repairs, when a heating system is being upgraded, or in homes using an off-peak electricity tariff. However, using an immersion heater from standard-rate grid electricity is generally more expensive than heating water with an efficient gas boiler or heat pump. Electric resistance heating turns electricity into heat very effectively, but electricity itself normally costs more per unit than gas.

For that reason, leaving an immersion heater on continuously is rarely the most economical approach. A timer, thermostat and correctly set cylinder controls are essential. The aim is to heat enough water for the household without paying to maintain unnecessarily high temperatures all day.

Is a solar diverter worth fitting?

A solar diverter can make good sense if your home has Solar PV, a hot-water cylinder and regular periods of surplus generation. It can increase the amount of solar electricity used within your home, reducing the electricity bought from the grid for hot water during sunnier months.

It is often especially attractive where the export payment for surplus electricity is lower than the cost of importing electricity later to heat water. The precise benefit will depend on your export tariff, import tariff, panel size and household demand. A home that uses most of its solar generation during the day may have less spare electricity available for diversion, while a household that is empty during working hours may see more regular surplus.

There are also practical benefits. Heating water with daytime solar can reduce reliance on a boiler in spring and summer, when central heating is not needed. For some households, that can mean fewer boiler firing cycles and a more useful return from the Solar PV system already on the roof.

That said, a diverter is not a substitute for enough generating capacity, a sound cylinder or properly sized hot-water provision. It cannot create extra solar electricity, and it cannot correct an undersized cylinder or a poorly performing immersion element.

Your hot-water cylinder is the deciding factor

Homes with a combi boiler usually do not have a stored hot-water cylinder. Hot water is produced on demand, so there is no immersion heater for a solar diverter to heat. In this situation, a diverter is not normally the right first option.

Homes with a vented or unvented cylinder are more promising, provided the cylinder has a suitable immersion connection and adequate capacity. An electrician and heating engineer should assess the installation, including the immersion rating, thermostat, wiring, consumer unit and the cylinder's condition.

Cylinder insulation is important too. There is little value in using solar electricity to heat water at midday if the tank loses too much heat before anyone needs it. Modern cylinders and well-insulated pipework help preserve the energy you have generated.

For households considering an air source heat pump, cylinder design deserves even more attention. A heat pump cylinder is usually selected with a larger coil to allow efficient heat transfer. A solar diverter and immersion heater can still provide a useful top-up from surplus Solar PV, but the controls should be planned carefully so that the heat pump and diverter work together rather than heating water unnecessarily.

Efficiency, comfort and hygiene considerations

A solar diverter makes best use of surplus generation, but stored hot water still needs sensible temperature control. The cylinder thermostat must be correctly set, and the system should periodically reach an appropriate temperature to support good water hygiene. This is particularly relevant for larger cylinders and lower-temperature heating systems.

Avoid treating the diverter as a fit-and-forget device. The controls need to reflect how your household actually uses hot water. A family with morning showers may benefit from a programmed boost during long periods of poor weather. A couple who mainly use hot water in the evening may find that solar-diverted heat covers much of their demand from late spring through early autumn.

A professional installation should also account for safety controls, electrical protection and the condition of the existing immersion heater. Older elements can fail, thermostats can stick, and cylinders may have hidden issues that should be addressed before adding new controls.

Choosing the right approach for your home

If you already have a cylinder and Solar PV, adding a diverter to a sound immersion heater is often the most direct route to solar-heated water. If the immersion is old or unreliable, replacing it as part of the work may be sensible. If your home has a combi boiler, the conversation should start with your wider hot-water system rather than a diverter alone.

It is also worth looking beyond a single product. The strongest results come from considering Solar PV generation, household electricity use, hot-water demand, cylinder capacity, insulation and future plans for heating upgrades together. A carefully designed system is more likely to deliver reliable comfort as well as lower running costs.

For homeowners in Burgess Hill, Haywards Heath and the surrounding area, a site assessment can establish whether your existing hot-water setup is ready to make better use of Solar PV. The right solution should leave you with dependable hot water, straightforward controls and an energy system that works for the way your household lives.

View original article

Need a hand with your plumbing or heating?

Our Gas Safe registered engineers cover Sussex and the surrounding area.